Impact of fixed orthodontic retainers on oral health-related quality of life: a longitudinal prospective study

ABSTRACT Objective: The aim of the present study was to assess the impact of orthodontic retainers on oral health-related quality of life (OHRQoL) in the short and long terms after orthodontic treatment. Methods: Data from 45 patients up to three years after orthodontic treatment (T0) were analyzed. Patients were reassessed four years (T1) after T0. OHRQoL was measured using the OHIP-14 (Oral Health Impact Profile-14) questionnaire. The presence of a fixed retainer in the upper and/or lower arches, sex, and age were the predictive variables evaluated at T0 and T1. The occurrence of retainer fracture at T0 was clinically evaluated. Due to the COVID-19 pandemic, clinical examination on T1 was not possible, so the OHIP-14 and the self-perception of changes in teeth position and fracture of retainers were examined using an on-line questionnaire. Results: At the initial examination, the presence of upper retainers had a negative impact on quality of life (p=0.018). The OHIP-14 value increased significantly from T0 to T1 (p=0.014), regardless of the presence of retainers. The fracture or debonding of the retainer reported by the patient was the only variable that had a negative impact on OHRQoL (p=0.05). Conclusion: The use of fixed upper retainers suggests a negative impact on the quality of life of the orthodontic patient after the end of orthodontic treatment. This impact, however, is negligible in the long term, except when associated with fracture or debonding. This study emphasizes the need for continuous follow-up of orthodontic patients during the retention period.

RESUMO Objetivo: O objetivo deste estudo foi avaliar o impacto das contenções ortodônticas na qualidade de vida relacionada à saúde bucal (QVRSB) em curto e longo prazos após o tratamento ortodôntico. Métodos: Foram analisados dados de 45 pacientes até três anos após o tratamento ortodôntico (T0). Os pacientes foram reavaliados quatro anos (T1) após T0. A QVRSB foi mensurada usando o questionário OHIP-14 (Oral Health Impact Profile-14). A presença da contenção fixa nas arcadas superior e/ou inferior, o sexo e a idade foram as variáveis preditoras em T0 e T1. A ocorrência de quebra da contenção em T0 foi avaliada clinicamente. Em razão da pandemia da COVID-19, não foi possível o exame clínico em T1; assim, a autopercepção das alterações na posição dos dentes e a quebra ou descolagem das contenções foram registradas por meio de um questionário online. Resultados: No exame inicial, a presença da contenção superior apresentou um impacto negativo na qualidade de vida (p=0,018). Em T1, o valor de OHIP-14 aumentou significativamente em comparação a T0 (p=0,014), independentemente da presença das contenções. A quebra ou descolagem da contenção relatada pelo paciente foi a única variável que apresentou um impacto negativo na QVRSB (p=0,05). Conclusão: O uso de contenção fixa superior sugere um impacto inicial negativo na qualidade de vida do paciente após o fim do tratamento ortodôntico. Esse impacto, entretanto, é insignificante em longo prazo, exceto quando associado à descolagem ou quebra das contenções ortodônticas. Esse estudo enfatiza a necessidade de acompanhamento contínuo das contenções fixas após a finalização do tratamento ortodôntico.

Percentage of patients shifting to another treatment modality: An experience-guided decision

ABSTRACT Objective: This study aimed to assess the frequency with which orthodontic patients decided to shift to another type of orthodontic appliance, among conventional metal brackets, ceramic brackets, lingual brackets and clear aligner, based on their personal experiences of pain, ulcers, bad breath, hygiene issues and social difficulties. Material and Methods: This study comprises of patients seeking orthodontic treatment. The sample (n = 500; age group = 19-25 years) was divided equally into four groups based on the treatment modality: conventional metal brackets, ceramic brackets, lingual brackets and clear aligner. Patients rated the questionnaire using a visual analogue scale, to assess variables (such as pain, ulcer etc) that impact various treatment modalities. Subsequently, patients from all groups provided feedback regarding their treatment experiences, and expressed their preference for an alternative modality. Intergroup comparison among the four groups was done using one-way analysis of variance with Tukey's HSD post-hoc test (p ≤ 0.05). Results: Patients who received lingual brackets reported higher levels of pain and ulceration, as compared to those who received clear aligners. All four groups showed statistically significant differences for ulcers during treatment (p ≤ 0.05). Of the 125 patients who received conventional metal brackets, 28% expressed a preference for clear aligner therapy, while 20% preferred ceramic brackets. In the lingual group, 56% of 125 patients preferred clear aligner therapy, and 8% preferred ceramic brackets to complete their treatment. In the ceramic group, 83% did not want to switch, whereas 17% desired to switch to clear aligner, while in aligner group no patient desired to switch. Conclusions: A higher percentage of patients from lingual brackets group chose to shift to clear aligners, followed by conventional metal brackets group and by ceramic brackets group, in this descending order. The clear aligner group demonstrated fewer issues than the other treatment modalities.

RESUMO Objetivo: Este estudo teve como objetivo avaliar a frequência com que pacientes ortodônticos decidiram mudar para outro tipo de aparelho ortodôntico, entre braquetes convencionais de metal, braquetes cerâmicos, braquetes linguais e alinhadores transparentes, com base em suas experiências pessoais de dor, aftas, mau hálito, problemas de higiene e dificuldades sociais. Material e Métodos: Esse estudo foi composto por pacientes que procuram tratamento ortodôntico. A amostra (n = 500; faixa etária = 19-25 anos) foi dividida igualmente em quatro grupos, com base na modalidade de tratamento: braquetes metálicos convencionais, braquetes cerâmicos, braquetes linguais e alinhadores transparentes. Os pacientes responderam a um questionário, usando uma escala visual analógica, para avaliar variáveis como dor e aftas, que impactam diferentes modalidades de tratamento. Posteriormente, os pacientes de todos os grupos forneceram feedback sobre suas experiências de tratamento e expressaram sua preferência por uma modalidade alternativa. A comparação intergrupos entre os quatro grupos foi feita usando análise de variância unidirecional com teste post-hoc HSD de Tukey (p ≤ 0,05). Resultados: Os pacientes que usaram braquetes linguais relataram níveis mais elevados de dor e aftas, em comparação com aqueles que usaram alinhadores transparentes. Todos os quatro grupos apresentaram diferenças estatisticamente significativas para aftas durante o tratamento (p ≤ 0,05). Dos 125 pacientes que usaram braquetes metálicos convencionais, 28% expressaram preferência pelo tratamento com alinhadores transparentes, enquanto 20% preferiram braquetes cerâmicos. No grupo com braquetes linguais, 56% dos 125 pacientes preferiram o tratamento com alinhadores transparentes e 8% preferiram braquetes cerâmicos para completar o tratamento. No grupo com braquetes cerâmicos, 83% não queriam trocar de tratamento, enquanto 17% desejavam mudar para os alinhadores transparentes; enquanto no grupo de alinhadores nenhum paciente desejou mudar. Conclusões: Uma porcentagem maior de pacientes do grupo com braquetes linguais optou pela mudança para alinhadores transparentes, seguido pelo grupo com braquetes metálicos convencionais e pelo grupo com braquetes cerâmicos, em ordem decrescente. O grupo de alinhadores transparentes demonstrou menos problemas do que as outras modalidades de tratamento.

Awareness of malocclusion and attitude towards orthodontic treatment among trainee dental surgery technicians in Nigeria

Objective: Malocclusion affects aesthetics, the physical, psychological and social life of a person. The aim of this study was to evaluate the awareness of malocclusion and attitude towards orthodontic treatment among trainee dental surgery technicians in Nigeria. Materials and Methods: This was a descriptive cross-sectional study carried out among 68 final year (sixty-eight) trainee dental surgery technicians in Nigeria. The research instrument was a self-administered close ended questionnaire. Data was analyzed using SPSS version 20. P value (P<0.05) was regarded as significant. Results: Sixty-one (89.7%) of the respondents were females, while 7 (10.3%) were males. Fifty-seven (83.8%) have heard of the term malalignment of teeth, 53 (77.9%) of the students think malalignment is due to external habits. 61 (89.7%) are aware that few teeth may have to be removed for proper positioning of irregular teeth and 51 (75.0%) were aware that the irregular teeth can be corrected even after 40 years of age. More females were aware of malocclusion and had positive attitude towards orthodontic procedures when compared to the males, but the difference was not statistically significant (P>0.05).Conclusion. Majority of the respondents in this study were aware of the term malalignment and had positive attitude towards orthodontic treatment. More females constituted the study population.

Evaluation of condylar position in patients with malocclusion and changes in condylar position before and after orthodontic treatment using cone beam computed tomography / 口腔疾病防治

@#The functional health and stability of the oral and maxillofacial system is one of the basic goals of orthodontic treatment. Currently, it is believed that, in general, the condyle is located in the center of the joint fossa when the mandible is in an intercuspal position (ICP) in healthy normal people. At this time, the function of the temporomandibular joint (TMJ) is stable. Due to orthodontic tooth movement and subsequent occlusal changes, patients with malocclusion may experience related remodeling of the temporomandibular joint, especially changes in the position of the condyle. The position of the mandibular condyle is traditionally evaluated using a condylar position indicator. However, this method lacks consistency in obtaining condylar position changes. In recent years, in the clinical application of orthodontic treatment, cone beam computed tomography (CBCT) has become the first choice for examination. CBCT can accurately measure the interarticular space and determine changes in condylar position. This article reviews the CBCT assessment of condylar position and related research on condylar position changes in patients with malocclusion before and after orthodontic treatment. The literature review results indicate that there are differences in the condylar position of patients with different malocclusions, and the condylar position may also change before and after orthodontic treatment. With a lower radiation dose, CBCT has higher accuracy in evaluating the condylar position in patients with malocclusion who undergo orthodontic treatment, thus promoting further study of the mechanism of condylar position changes in patients with malocclusion in the future and providing more accurate and personalized guidance for patient treatment.

Avaliação dos Efeitos da Remoção da Resina Residual e do Polimento na Superfície do Esmalte após Descolagem do Braquete / Evaluation of the Effects of Residual Resin Removal and Polishing on the Enamel Surface after Bracket Debonding

Considerando o uso de brocas para remoção da resina residual após descolagem do braquete e a possibilidade de injúrias à superfície do esmalte após o uso dessas brocas, este trabalho teve como objetivo realizar um estudo experimental, para avaliar a variação do aspecto superficial do esmalte de forma qualitativa, por meio da avaliação com imagens topográficas do esmalte dentário, utilizando-se a Microscopia Eletrônica de Varredura (MEV), a qual permitiu ilustrar e avaliar a superfície do esmalte após a fase de polimento final, realizada por dois métodos: taça de borracha ou escova Robinson. Foram utilizados 25 dentes pré-molares humanos, obtidos a partir de exodontias em pacientes que procuraram voluntariamente o curso de Residência em Cirurgia da Clínica Odontológica Universitária da Universidade Estadual de Londrina. Os dentes foram divididos em quatro grupos: A, B, C e D, contendo 6 dentes cada, de acordo com as brocas utilizadas para a remoção do remanescente adesivo e o polimento escolhido, além de um dente como "controle". Foi avaliada a rugosidade superficial do esmalte após a remoção da resina e a superfície do esmalte após o polimento com as duas opções apresentadas. Os resultados mostraram que, por observação e inspeção, as brocas removeram a resina residual de todos os dentes, porém, causaram riscos e ranhuras, como evidenciado nas imagens em MEV. Concluiu-se que não houve diferença estatística entre os métodos de polimento e que ambos foram importantes para a redução das marcas abrasivas, proporcionando uma superfície mais lisa do esmalte.

Considering the use of specific burs to remove residual resin after bracket debonding and the possibility of injuries to the dental enamel after using these burs, this study aimed to verify the variation in the enamel surface appearance in a qualitative way and evaluation with topographic images of the dental enamel. The use of Scanning Electron Microscopy (SEM) allowed to illustrate and evaluate the enamel surface after the final polishing phase using two methods: rubber cup or Robinson brush. Twenty-five human premolar teeth were obtained from extractions in patients who voluntarily sought the Oral Maxillofacial Surgery Residency at the Dental School from the State University of Londrina; the teeth were divided into four groups A, B, C and D containing 6 teeth each according to the burs used to remove the remaining adhesive and the chosen polishing, in addition to one tooth as a "control". Dental enamel surface roughness was evaluated after resin removal and enamel surface after polishing with the two methods presented. The results showed that by observation and inspection, the burs removed residual resin from all teeth, however, caused scratches and grooves as evidenced in the SEM images. Based on the results, there was no statistical difference between the polishing methods, and both were important for the reduction of abrasive marks and provided a smoother enamel surface.

Contribution of Digital Technology to the Surgical Technique of Miniscrew Insertion: a Literature Review

Orthodontic miniscrews are used to achieve absolute anchorage. Their insertion technique is simple but must be precise to avoid intra- and postoperative complications. This study aimed to review the literature on the role of digital technology in the precise placement of miniscrews and to describe the different stages of the insertion guide manufacturing chain. The databases used were PubMed, Science Direct, and Google Scholar, including the following English descriptors: "Orthodontic Anchorage Procedures," "Cone Beam Computed Tomography." Digital technology improves the accuracy of miniscrew placement by using 3D imaging to assess the quantity and quality of bone and the proximity of anatomical structures in the area to be implanted. By combining 3D imaging with the new techniques of 3D printing and virtual planning, the orthodontist can obtain a personalized placement guide for the patient using computer-aided design and manufacturing techniques. A digitally-assisted miniscrew insertion system is a promising technique for precise and safe miniscrew insertion but cannot be used routinely. Therefore, large-scale studies are needed to map miniscrew insertion in different areas, considering ethnicity, gender, and different anatomical characteristics.

Prevalencia de Anomalías Dentomaxilares y Necesidad de Tratamiento Ortodóncico en Escolares del Pueblo Originario Rapa Nui / Prevalence of Dentomaxillary Anomalies and Need for Orthodontic Treatment in School Children of the Rapa Nui Native People

El objetivo de este estudio fue determinar la prevalencia de anomalías dentomaxilares y la necesidad de tratamiento ortodóncico en escolares pertenecientes al pueblo originario de Rapa Nui. Se realizó un estudio descriptivo, observacional, transversal y no probabilístico. Se evaluaron 85 alumnos entre primero básico y primero medio, entre los 6 y 16 años de edad, de dos colegios de Rapa Nui. Se realizó un examen clínico estandarizado, realizado por dos investigadores previamente calibrados, donde se completó una ficha clínica diseñada para el estudio. Para el análisis de las anomalías dentomaxilares se realizó un escaneo digital de la cavidad oral completa para su posterior análisis. De 85 estudiantes evaluados, 75 (88,2 %) se encontraban afectados por algún tipo de anomalía dentomaxilar en el plano sagital, vertical y/o transversal, independiente de su gravedad. Un 87,1 % de los estudiantes necesitan tratamiento ortodóncico según el Índice de Necesidad de Tratamiento Ortodóncico, de los cuales un 57,7, % se clasificó dentro de los rangos de moderado, grave y muy grave. Existe una alta prevalencia de anomalías dentomaxilares en los escolares pertenecientes al pueblo originario Rapa Nui, encontrándose por sobre las cifras nacionales como internacionales, lo cual da como resultado que la mayoría de los alumnos evaluados necesiten de algún tipo tratamiento ortodóncico, ya sea preventivo, interceptivo y/o correctivo.

The aim of this study was to determine the prevalence of dentomaxillary anomalies and the need for orthodontic treatment in schoolchildren belonging to the Rapa Nui native people. A descriptive, observational, cross- sectional and non-probabilistic study was carried out. Eighty- five students between first grade and first middle school, between 6 and 16 years of age, from two schools of Rapa Nui were evaluated. A standardized clinical examination was performed by two previously calibrated investigators, where a clinical record designed for the study was completed. For the analysis of dentomaxillary anomalies, a digital scan of the full mouth was performed for subsequent analysis. Of 85 students evaluated, 75 (88.2 %) were affected by some type of dentomaxillary anomaly in the sagittal, vertical and/or transversal plane, regardless of its severity. Some 87.1 % of the students needed orthodontic treatment according to the Orthodontic Treatment Need Index, of which 57.7 % were classified within the moderate, severe and very severe ranges. There is a high prevalence of dentomaxillary anomalies in schoolchildren belonging to the Rapa Nui native people, which is above the national and international figures, resulting in the majority of the students evaluated needing some type of orthodontic treatment, whether preventive, interceptive and/or corrective.

Efficacy of ClinproTMXT Varnish surrounding brackets on the enamel surface of white spot lesion

Abstract Orthodontics patients usual develop demineralization and present cavity caries lesions after six months. Minimally invasive procedures have been the goal in modern dental practice. The aim of this study was to evaluate the effect of ClinproTMXT Varnish, on the enamel surface roughness and severity of white spot lesions. Twenty premolars were submitted to bond brackets and experimental induction of demineralization and randomly divided into 2 groups: GI - fluoride varnish (Colgate Duraphat®); GII - Ionomeric Sealant (ClinproTMXT Varnish). The treatment was applied around the brackets. The surface roughness of specimens was analyzed, before treatment and 12 weeks after treatment by laser confocal microscopy, and the severity of the white spot lesion was by laser fluorescence device. The data were analyzed by non-parametric Wilcoxon and Mann-Whitney Test, at 5% significance, roughness percentage reduction was performed. The severity of demineralization decreased in both, GI (p = 0.005) and GII (p = 0.019). Enamel superficial roughness levels decreased in GI and GII. As well as the roughness percentage, being more expressive in the ClinproTMXT Varnish group (85,09%). Colgate Duraphat® or Clinpro™ XT Varnish reduced the severity of the demineralization and decreased the superficial roughness on the enamel. The Clinpro™ XT Varnish was superior to superficial roughness on enamel.

Resumo Pacientes ortodônticos geralmente desenvolvem desmineralização e apresentam lesões de cárie após seis meses de tratamento. Procedimentos minimamente invasivos têm sido o objetivo na prática odontológica moderna. O objetivo deste estudo foi avaliar o efeito do ClinproTM XT selante ionomérico, ao redor do bráquete, com relação a rugosidade superficial do esmalte e a severidade da lesão induzida. Vinte pré-molares foram submetidos a colagem de bráquetes e indução experimental de desmineralização e divididos aleatoriamente em 2 grupos: GI - verniz fluoretado (Colgate Duraphat®); GII - Selante Ionomérico (ClinproTM XT). O tratamento foi aplicado ao redor dos bráquetes. A rugosidade da superfície dos espécimes foi analisada, antes do tratamento e 12 semanas após o tratamento por microscopia confocal a laser e severidade da lesão de mancha branca por dispositivo de fluorescência a laser. Os dados foram analisados pelo teste não paramétrico de Wilcoxon e Mann-Whitney, a 5% de significância. A taxa de redução da lesão foi calculada. A severidade da desmineralização diminuiu tanto no GI (p = 0,005) quanto no GII (p = 0,019). Os níveis de rugosidade superficial do esmalte diminuíram no GI e GII, assim como o percentual de rugosidade, sendo mais expressivo no grupo ClinproTMXT (85,09%). Colgate Duraphat® e Clinpro™ XT reduziram a severidade da desmineralização e diminuíram a rugosidade superficial do esmalte. O selante ionomérico Clinpro™ XT foi superior na redução percentual de rugosidade.

Harmonização do sorriso: aliando ortodontia e estética / Smile harmonization: combining orthodontics and aesthetics

Atualmente é evidente a demanda contínua por padrões de beleza, cada vez mais impecáveis, um sorriso alinhado e harmônico com dentes brancos para se sorrir com confiança. O tratamento odontológico interdisciplinar tem como intuito proporcionar uma boa saúde periodontal, restabelecer a estética e a função do sistema estomatognático. Objetivo: apresentar um relato de caso clínico envolvendo harmonização do sorriso como cirurgia plástica periodontal para alinhamento da margem gengival na região anterior e restaurações diretas em resina composta após a finalização do tratamento ortodôntico, evidenciando a importância da abordagem conservadora e multidisciplinar no âmbito do tratamento estético. Relato de caso: Realizamos o tratamento ortodôntico com aparelho autoligado cerâmico para alinhamento do arco dental e intrusão do elemento 13, em sequência executamos um recorte gengival nos elementos 12 e 22, clareamento dental associado após 15 dias, subsequentemente, reanatomização dentária no elemento 44 para que o elemento 13 não voltasse a extruir pela falta de contato oclusal, e por fim, remodelação dental fazendo uso de resina composta nos elementos 12, 21 e 22 devido a manchas de hipocalcificação dental. Conclusão: Contudo, a estética bucal tem a capacidade de possibilitar a melhoria na autoestima, devolvendo à função, proporcionando satisfação e bem-estar ao indivíduo, enaltecendo o sorriso.

Currently, the continuous demand for increasingly impeccable beauty standards is evident, an aligned and harmonic smile with white teeth to smile with confidence. Interdisciplinary dental treatment aims to provide good periodontal health, restore the aesthetics and function of the stomatognathic system. Objective: to present a clinical case report involving smile harmonization as periodontal plastic surgery for aligning the gingival margin in the anterior region and direct composite resin restorations after completion of orthodontic treatment, highlighting the importance of a conservative and multidisciplinary approach in the field of aesthetic treatment . Case report: We performed orthodontic treatment with a self-ligating ceramic appliance for aligning the dental arch and intruding element 13, then performed a gingival cutout on elements 12 and 22, associated tooth whitening after 15 days, subsequently, dental reanatomization on element 44 to that element 13 would not extrude again due to the lack of occlusal contact, and finally, dental remodeling using composite resin in elements 12, 21 and 22 due to dental hypocalcification stains. Conclusion: However, oral aesthetics has the ability to improve self-esteem, returning to function, providing satisfaction and well-being to the individual, enhancing the smile.

Tempo de tratamento ortodôntico com aparelhos autoligados: revisão de literatura

Introdução: Atualmente, braquetes autoligados têm sido sugeridos para reduzir o tempo de tratamento na Ortodontia. Objetivo: Dessa maneira, o presente estudo objetivou revisar a literatura acerca do tempo de tratamento com esses braquetes, em comparação com outros braquetes e tratamentos sugeridos. Revisão de literatura: Foi realizada pesquisa bibliográfica de caráter descritivo, que compreendeu o levantamento de referencial teórico na base de dados eletrônica Medline ­ PubMed. A seleção de artigos foi feita a partir dos títulos e resumos e a revisão compreendeu 4 artigos publicados na língua inglesa no período de 2019 a 2023. Conclusão: Há uma escassez de estudos clínicos envolvendo essa temática e o tratamento ortodôntico com aparelhos autoligados parece apresentar menor tempo de tratamento em comparação com aparelhos fixos tradicionais. No entanto, os estudos não mostraram diferenças estatisticamente significativas na redução desse tempo. Pode-se sugerir que mais estudos clínicos sejam conduzidos no intuito de elucidar essa questão.

Introduction: Currently, self-ligating brackets have been suggested to reduce treatment time in Orthodontics. Objective: Therefore, the present study aimed to review the literature about the treatment time with these brackets, in comparison with other brackets and suggested treatments. Literature review: Descriptive bibliographical research was carried out, which included the survey of theoretical references in the electronic database Medline ­ PubMed. The selection of articles was made based on titles and abstracts and the review comprised 4 articles published in the English language from 2019 to 2023. Conclusion: there is a shortage of clinical studies involving this topic and orthodontic treatment with self-ligating appliances seems to present shorter treatment time compared to traditional fixed appliances. However, the studies did not show statistically significant differences in reducing this time. It can be suggested that more clinical studies be conducted to elucidate this issue.

Tomographic evaluation of mandibular buccal shelf in patients with different vertical growth pattern / Evaluación de la placa ósea mandibular en pacientes con diferente patrón de crecimiento vertical

The purpose of this research was the tomographic evaluation of the Mandibular Buccal Shelf (MBS) in orthodontic patients with different vertical growth pattern. An observational, descriptive, cross-sectional and retrospective study was conducted. Tomographic images of patients aged 14 to 40 years were observed and a database was formed with those that met the inclusion criteria. The sample size was 10 for each group according to vertical growth pattern (hypodivergent, normodivergent and hyperdivergent). Then four zones of frequent insertion of extralveolar mini-screws were selected in the MBS, taking as a reference the mesial and distal roots of the first and second mandibular molar. When comparing the characteristics of MBS between vertical growth patterns, between sexes and hemiarchs, no statistically significant differences were found. However, when the characteristics of MBS were compared according to the reference root, it was found that there were statistically significant differences. The vestibular area to the distal root of the second mandibular molar presented the highest values in terms of angulation, height and thickness. There are no significant differences in the bone characteristics of MBS according to vertical growth patterns, sexes or hemiarchs. Angulation, height and thickness progressively increase from the vestibular bone of the mesial root of the first mandibular molar to the distal root of the second molar.

El propósito de esta investigación fue la evaluación tomográfica de la placa ósea mandibular (POM) en pacientes de ortodoncia con diferente patrón de crecimiento vertical. Se realizó un estudio de tipo observacional, descriptivo, transversal y retrospectivo. Se observó imágenes tomográficas de pacientes de 14 a 40 años de edad y se formó una base de datos con las que cumplían los criterios de selección. El tamaño de muestra fue de 10 para cada grupo según patrón de crecimiento vertical (hipodivergentes, normodivergentes e hiperdivergentes). Luego se seleccionaron cuatro zonas de inserción frecuente de minitornillos extralveolares en la POM, tomando como referencia las raíces mesial y distal del primer y segundo molar mandibular. Al realizar la comparación de las características de la POM entre patrones de crecimiento vertical, entre sexos y hemiarcadas no se encontraron diferencias estadísticamente significativas. Sin embargo, cuando se comparó las características de la POM según la raíz de referencia se encontró que había diferencias estadísticamente significativas. La zona vestibular a la raíz distal de la segunda molar mandibular presento los mayores valores en cuanto angulación, altura y grosor. No existen diferencias significativas en las características óseas de la POM según patrones de crecimiento vertical, sexos o hemiarcadas. La angulación, la altura y el grosor aumenta progresivamente desde el hueso vestibular de la raíz mesial del primer molar mandibular hacia la raíz distal del segundo molar.

Tracción de tercer molar asociado a quiste dentígero y a nervio alveolar inferior: Reporte de caso

El objetivo de este estudio es presentar un reporte de caso de un paciente que presenta un tercer molar inferior asociado a un quiste dentígero, cuya lesión desplazó el diente hasta quedar inmerso dentro del canal alveolar inferior. Caso: Paciente acude por tratamiento de un quiste dentígero asociado a un tercer molar desplazado hacia nervio alveolar inferior y borde basilar. Se realiza una descompresión del quiste, además de una tracción de la pieza con ortodoncia para posteriormente ser extraída de forma segura. Conclusión: La tracción ortodóntica de tercer molar ofrece una buena alternativa frente a estos casos. Si bien la evolución del paciente frente a este tratamiento es favorable, falta evidencia que demuestre significativamente su eficacia.

The aim of this study is to present a case report of a patient with a lower third molar associated with a dentigerous cyst, whose lesion displaced the tooth into the inferior alveolar canal. Case: Patient asks for treatment of a dentigerous cyst associated with a displaced third molar towards the inferior alveolar nerve and basilar border. A cyst decompression was performed, in addition to a traction of the tooth with orthodontics to be later extracted in a safe way. Conclusion: Traction of the third molar offers a good choice in cases such as the one presented in this article. Although the evolution of the patient is favorable, there is a lack of evidence demonstrating its efficacy.

Intervenciones quirúrgicas mínimamente invasivas complementarias a la ortodoncia quirúrgicamente asistida: Resumen estructurado de evidencia

Introducción: Existen procedimientos quirúrgicos que pueden generar una disminución en la duración de los tratamientos de ortodoncia (TO) mediante una aceleración del movimiento dental. La técnica más estudiada corresponde a la corticotomía clásica, la cual muchas veces es desechada por los pacientes debido a su invasividad. Es por esto que nacen las intervenciones quirúrgicas mínimamente invasivas (IQMI), tales como las micro osteoperforaciones (MOP) y la piezocisión, que buscan el mismo resultado, pero sin realizar colgajos de espesor total, otorgándole al paciente nuevas alternativas terapéuticas para acortar el tratamiento de ortodoncia. La evidencia al respecto aún es controversial, debido a que la certeza de la evidencia es baja o muy baja con relación a estos procedimientos. Métodos: Realizamos una búsqueda en Epistemonikos, la mayor base de datos de revisiones sistemáticas en salud, la cual es mantenida mediante el cribado de múltiples fuentes de información, incluyendo MEDLINE, EMBASE, Cochrane, entre otras. Extrajimos los datos desde las revisiones identificadas, analizamos los datos de los estudios primarios, realizamos un metaanálisis y preparamos una tabla de resumen de los resultados utilizando el método GRADE. Resultados y conclusiones: Identificamos 39 revisiones sistemáticas que en conjunto incluyeron 43 estudios primarios, de los cuales, 31 corresponden a ensayos aleatorizados. Concluimos que las intervenciones quirúrgicas mínimamente invasivas podrían aumentar la tasa de movimiento dental a las 12 semanas, la distancia total acumulada, la tasa de movimiento dental y reducir la duración total de tratamiento, pero la certeza de la evidencia es incierta. Además, podrían resultar en poca o ninguna diferencia sobre el índice gingival, la profundidad de sondaje y el índice de placa.

Introduction: There are surgical procedures that can generate a decrease in the orthodontic (OT) treatments duration through a Acceleration of tooth movement. The most studied technique corresponds to classical corticotomy, which is often discarded by patients due to its invasiveness. This is why minimally invasive surgical interventions (MISI) are born, such as micro osteoperforations (MOP) and piezocision, which seek the same result, but without making total thickness flaps, giving the patient new therapeutic alternatives to shorten orthodontic treatment. The evidence on this is still controversial, because the certainty of the evidence is low or very low in relation to these procedures. Methods: A search was performed using Epistemonikos, the biggest database for systematic reviews in health, which is maintained by screening of multiple sources of information, including MEDLINE, EMBASE, Cochrane, among others. Data from systematic reviews were extracted, and analysis of the primary studies was performed, including a meta-analysis and a summary of findings table using GRADE approach. Results and conclusions: We identified 39 systematic reviews that together included 43 primary studies, of which 31 correspond to randomized clinical trials. We conclude that minimally invasive surgical interventions could increase the rate of tooth movement at 12 weeks, distance total accumulated, the rate of tooth movement and reduce the total duration of treatment, but the certainty of the evidence is uncertain. In addition, they could result in little or no difference in gingival index, probing depth and plaque index.

Analgesia por láser de baja potencia en pacientes con tratamiento ortodóncico / Low power laser analgesia in patients with orthodontic treatment i: en

Introducción: El dolor es el síntoma más común luego de la primera activación de la aparatología ortodóncica. El tratamiento analgésico más utilizado es el paracetamol; sin embargo, su uso inhibe la actividad de la ciclooxigenasa y la síntesis de prostaglandinas, lo que puede afectar el mecanismo del movimiento dental y el remodelado óseo. Objetivo: Evaluar la efectividad del láser de baja potencia para el alivio del dolor en pacientes con tratamiento ortodóntico. Métodos: Se realizó un estudio cuasiexperimental de intervención terapéutica, desde enero hasta diciembre de 2020, en 40 pacientes atendidos en la consulta de ortodoncia del Hospital General Docente Dr. Juan Bruno Zayas Alfonso de Santiago de Cuba, en quienes se aplicaría fuerza ortodóncica por primera vez. Estos fueron distribuidos de forma aleatoria en 2 grupos de 20 integrantes cada uno: el de estudio, tratado con láser de baja potencia, y el de control, que recibió medicación convencional (paracetamol). Para la validación estadística de la información se emplearon el porcentaje y la prueba de la t de Student para muestras independientes, con 95 % de confiabilidad. Resultados: Luego de tres sesiones terapéuticas, 90,0 % del grupo de estudio refirió no presentar dolor o sentirlo de forma leve, mientras que del grupo de control solo 10,0 % de los pacientes fue ubicado en cualquiera de las dos categorías anteriores. Existió diferencia significativa entre ambos grupos (p=0,00). Conclusiones: Se demostró que el láser, como terapia alternativa, fue más efectivo que el paracetamol.

Introduction: Pain is the most common symptom after the first activation of orthodontic appliance. The most widely used analgesic treatment is paracetamol; however, its use inhibits cyclooxygenase activity and prostaglandin synthesis, which can affect the mechanism of tooth movement and bone remodeling. Objective: To evaluate the effectiveness of low power laser for pain relief in patients with orthodontic treatment. Methods: A quasi-experimental study of therapeutic intervention was carried out, from January to December 2020, in 40 patients treated at the orthodontic clinic of Dr. Juan Bruno Zayas Alfonso Teaching General Hospital in Santiago de Cuba, in whom orthodontic force was applied for the first time. These were randomly distributed into 2 groups of 20 members each: the study group, treated with low-power laser, and the control group, that received conventional medication (paracetamol). For statistical validation of data, the percentage and the Student's t test for independent samples were used, with 95 % confidence interval. Results: After three therapeutic sessions, 90.0% of the study group reported not presenting pain or feeling it slightly, while only 10.0% of patients in control group were put in any of the two previous categories. There was a significant difference between both groups (p=0.00). Conclusions: Laser, as an alternative therapy, was shown to be more effective than paracetamol.

Does the initial surface roughness of different CuNiTi wires affect the frictional resistance?

Abstract This study aimed to assess and correlate initial surface roughness and frictional resistance of rectangular CuNiTi wires inserted in different self-ligating brackets. The sample consisted of 40 bracket-wire sets (rectangular CuNiTi wires of 0.017" x 0.025" and passive self-ligating brackets) divided into four groups (n=10): metallic self-ligating bracket and metallic CuNiTi wire (G1); metallic self-ligating bracket and rhodium-coated CuNiTi wire (G2); esthetic self-ligating bracket and metallic wire (G3); esthetic self-ligating bracket and rhodium-coated CuNiTi wire (G4). The initial surface roughness of the wires was examined with a Surfcorder roughness meter, model SE1700. Later, frictional resistance was assessed in an Instron 4411 universal testing machine at a speed of 5 mm/min, in an aqueous medium at 35°C. Microscopic analyses of surface morphology were performed with scanning electron microscopy, using an LEO 1430, with magnifications of 1000X. Generalized linear models were applied, considering the 2 x 2 factorial (bracket type x wire type), at a 5% significance level. Regardless of bracket type, the groups with esthetic wires presented higher initial surface roughness than the groups with metallic wires (p<0.05). There was no significant difference between the different bracket-wire sets for frictional resistance and no significant correlation between frictional resistance and initial surface roughness in the environment studied. It is concluded that esthetic wires presented higher initial surface roughness but did not interfere with the frictional resistance between brackets and wires.

Resumo O objetivo deste estudo foi avaliar e correlacionar a rugosidade superficial inicial e a resistência a fricção dos fios CuNiTi retangulares inseridos em diferentes bráquetes autoligados. A amostra foi composta por 40 conjuntos bráquetes-fios (fios retangulares CuNiTi de 0.017" x 0.025" e braquetes autoligados passivos), divididos em 4 grupos (n=10): bráquete autoligado metálico e fio CuNiti metálico (G1); braquete autoligado metálico e fio CuNiti com revestimento de rhodium (G2); bráquete autoligado estético e fio metálico (G3); bráquete autoligado estético e fio CuNiti com revestimento de rhodium (G4). A rugosidade superficial inicial do fio foi examinada com um rugosímetro Surfcorder modelo SE1700. Posteriormente, a resistência a fricção foi avaliada em uma máquina de ensaios universal Instron 4411, a uma velocidade de 5mm/min em meio aquoso à 35oC. Análises microscópicas da morfologia de superfície foram realizadas por microscopia eletrônica de varredura, utilizando um LEO 1430, com ampliações de 1000X. Foram aplicados modelos lineares generalizados, considerando o fatorial 2 x 2 (tipo de bráquete x tipo de fio), com o nível de significância de 5%. Independentemente do tipo de bráquete, os grupos com fios estéticos apresentaram maior rugosidade superficial inicial que os grupos com fios metálicos (p<0,05). Não houve diferença significativa entre os diferentes conjuntos bráquetes-fios quanto a resistência à fricção e não houve correlação significativa entre a resistência a fricção e a rugosidade superficial inicial no ambiente estudado. Conclui-se que os fios estéticos apresentaram maior rugosidade superficial inicial porém não interferiram na resistência a fricção entre os braquetes e os fios.

Bilateral tongue fibrous hyperplasia: A case report and literature review / Hiperplasia fibrosa bilateral de língua: relato de um caso e revisão daliteratura

Focal fibrous hyperplasia (FFH) is a pathology characterized by tissue enlargement as a result of increasing the number of inflammatory cells which receive chronic mechanical stimuli of low intensity that may affect gums, lip, palate, jugal mucosa and tongue.The aim of this article is to report a case of FFH on the lateral border on both sides of the tongue associated with the use of the Hyrax appliance in a hebiatric patient, whose chief complaint was chewing discomfort. This case was diagnosed clinically and by histopathology analysis and treated by surgical excision as well as the removal of Hyrax appliances. Follow-up care provided the recovery of the patient's quality of life.

La hiperplasia fibrosa focal (HFF) es una patología caracterizada por el aumento de tamaño de los tejidos como consecuencia del aumento del número de células inflamatorias que reciben estímulos mecánicos crónicos de baja intensidad que pueden afectar a encías, labio, paladar, mucosa yugal y lengua. El objetivo de este artículo es reportar un caso de FFH en el borde lateral a ambos lados de la lengua asociado al uso del aparato Hyrax en un paciente hebiátrico, cuyo principal motivo de consulta era la molestia masticatoria. Este caso fue diagnosticado clínicamente y por análisis histopatológico y tratado mediante escisión quirúrgica así como la retirada de los aparatos de Hyrax. La atención de seguimiento permitió la recuperación de la calidad de vida del paciente

Implications of occlusal plane in diagnosis and treatment of malocclusion / 浙江大学学报·医学版

Occlusal plane (OP) is one of the essential factors affecting craniofacial morphology and function. The OP not only assists in diagnosing malocclusion but also serves as an important reference for making treatment plans. Patients with different types of malocclusions have different forms of OP. Compared with patients with standard skeletal facial type, the occlusal plane of patients with skeletal class Ⅱ and high angle is steeper, while that of patients with skeletal class Ⅲ and low angle is more even. In orthodontic treatment, adjusting and controlling the OP can promote the normal growth and development of the mandible in most patients with malocclusion during the early stage of growth, while causing favorable rotation of the mandible in some adults with mild-to-moderate malocclusion. For moderate-to-severe malocclusion, the OP rotation by orthodontic-orthognathic treatment can achieve better long-term stability. This article reviews the evolution of the definition of OP and its implications for diagnosing and the guiding treatment of malocclusion.

Study on quantitative analysis of bracket-induced nonlinear response of labio-cheek soft tissue during the orthodontic process / 生物医学工程学杂志

In the orthodontics process, intervention and sliding of an orthodontic bracket during the orthodontic process can arise large response of the labio-cheek soft tissue. Soft tissue damage and ulcers frequently happen at the early stage of orthodontic treatment. In the field of orthodontic medicine, qualitative analysis is always carried out through statistics of clinical cases, while quantitative explanation of bio-mechanical mechanism is lacking. For this purpose, finite element analysis of a three-dimensional labio-cheek-bracket-tooth model is conducted to quantify the bracket-induced mechanical response of the labio-cheek soft tissue, which involves complex coupling of contact nonlinearity, material nonlinearity and geometric nonlinearity. Firstly, based on the biological composition characteristics of labio-cheek, a second-order Ogden model is optimally selected to describe the adipose-like material of the labio-cheek soft tissue. Secondly, according to the characteristics of oral activity, a two-stage simulation model of bracket intervention and orthogonal sliding is established, and the key contact parameters are optimally set. Finally, the two-level analysis method of overall model and submodel is used to achieve efficient solution of high-precision strains in submodels based on the displacement boundary obtained from the overall model calculation. Calculation results with four typical tooth morphologies during orthodontic treatment show that: ① the maximum strain of soft tissue is distributed along the sharp edges of the bracket, consistent with the clinically observed profile of soft tissue deformation; ② the maximum strain of soft tissue is reduced as the teeth align, consistent with the clinical manifestation of common damage and ulcers at the beginning of orthodontic treatment and reduced patient discomfort at the end of treatment. The method in this paper can provide reference for relevant quantitative analysis studies in the field of orthodontic medical treatment at home and abroad, and further benefit to the product development analysis of new orthodontic devices.

Deflection of tandem archwire in a specific self-ligating metal bracket system: an in vitro study

Abstract The aim of this study was to quantify the force exerted by tandem archwires in a specific system of passive self-ligating bracket. Forty-eight thermo-activated nickel-titanium orthodontic archwires were separated into four groups (n = 12): G1 - two .014" + .014" round archwires; G2 - two .014" + .016" round archwires; G3 - .014" x .025" rectangular archwire; and. G4 - .016" x .022" rectangular archwire. Brackets were fixed onto teeth 1.5 to 2.5 using a device that represented the upper teeth, maintaining an interbracket distance of 6.0 mm. The deflection tests were performed using the structure representative of tooth 1.1 as support on the Instron testing machine at a speed of 2.0 mm/min. The archwires were evaluated at deflections of 0.5 mm, 1.0 mm, and 1.5 mm. The data were analyzed by a generalized linear model, considering values at different deflections as repeated measurements in the same experimental unit (α = 0.5%). At 0.5 mm, higher forces were observed in G2 and G3, which did not differ significantly (p > 0.05). The lowest force was observed in G4 (p < 0.05). At 1.0 mm and 1.5 mm, the highest force was observed in G3, followed by G4 and G2 (p < 0.05). The lowest force was observed in G1 (p < 0.05). In general, tandem archwires (same or different calibers) in a specific passive self-ligating bracket exerted lower force when compared with rectangular archwires.

Pulp chamber temperature rise in light-cure bonding of brackets with and without primer, in intact versus restored teeth

ABSTRACT Objective: To evaluate the pulp chamber temperature rise (PCTR) in light-cure bonding of brackets with and without primer, in intact and restored mandibular central incisors (M1), maxillary first premolars (Mx4), and mandibular third molars (M8). Material and Methods: Ninety human teeth were included: M1 (n=30), Mx4 (n=30), and M8 (n=30). Light-cure bonding of brackets was performed in intact (n=60) and restored (n=30) teeth, with primer (n=60) or without (n=30) primer. PCTR was defined as the difference between initial (T0) and peak temperatures (T1), recorded with a thermocouple during light-cure bonding. Differences on PCTR between bonding techniques (primer vs. no primer), teeth types (M1 vs. Mx4 vs. M8), and teeth condition (intact vs. restored) were estimated by ANCOVA, with α=5%. Results: PCTR was significantly higher with the use of primer (2.05 ± 0.08oC) than without primer (1.65 ± 0.14oC) (p=0.02), and in M1 (2.23 ± 0.22oC) compared to Mx4 (1.56 ± 0.14oC) (p<0.01). There was no difference in the PCTR in M8 (1.77 ± 0.28oC) compared to M1 or Mx4 (p>0.05), and no difference between intact (1.78 ± 0.14oC) and restored (1.92 ± 0.08oC) teeth (p=0.38). There was no influence of dentin enamel thickness in the PCTR (p=0.19). Conclusion: PCTR was higher in light-cure bonding of brackets with primer, especially in M1. Light-cure bonding seems less invasive without primer.

RESUMO Objetivo: Comparar o aumento na temperatura da câmara pulpar (ATCP) na colagem de braquetes com fotoativação usando ou não primer, em dentes hígidos versus dentes restaurados, em incisivos centrais inferiores (ICI), primeiros pré-molares superiores (1PMS) e terceiros molares inferiores (3MI). Métodos: Foram incluídos noventa dentes humanos: ICI (n=30), 1PMS (n=30) e 3MI (n=30). A colagem de braquetes com fotoativação foi realizada em dentes hígidos (n=60) ou dentes restaurados (n=30), com primer (n=60) ou sem (n=30) primer. O ATCP foi definido como a diferença entre as temperaturas inicial (T0) e máxima (T1) registradas com um termômetro durante a colagem com fotoativação. As diferenças no ATCP entre as técnicas de colagem (com primer vs. sem primer), diferentes dentes (ICIvs.1PMSvs.3MI) e condição dos dentes (hígidos vs. restaurados) foram estimadas por ANCOVA, com α=5%. Resultados: O ATCP foi significativamente maior com o uso de primer (2,05 ± 0,08oC) do que sem primer (1,65 ± 0,14oC) (p=0,02), e no ICI (2,23 ± 0,22oC) do que no 1PMS (1,56 ± 0,14oC) (p<0,01). Não houve diferença no ATCP do 3MI (1,77 ± 0,28oC) em comparação com ICI ou 1PMS (p>0,05), e não houve diferença entre dentes hígidos (1,78 ± 0,14oC) e restaurados (1,92 ± 0,08oC) (p=0,38). Não houve influência da espessura da dentina e do esmalte no ATCP (p=0,19). Conclusão: O ATCP foi maior na colagem de braquetes com fotoativação usando primer, principalmente no ICI. A colagem com fotoativação parece ser menos invasiva sem primer.